Product ID:EASTMAN 920 ADHESIVE
MSDS Date:01/01/1985
FSC:8040
NIIN:00-860-9772
MSDS Number: BFTCH

Emergency Phone: 716-722-5151

Cage: 19139

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

METHYL-2-CYANOACRYLATE(CAS #137-05-3)

RTECS: HS7000000

Fraction By Weight: 90%

ACGIH TLV: 2 PPM

AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED

Fraction By Weight: 10%

Effects of Overexposure:EYES:IRRITATS/BONDS EYELIDS,SKIN:WILL BOND
ANYTHING.VAPOR:CAUSES IRRITAT.MAY IRRITAT MUCOUSA.

First Aid:SKIN:FLUSH IMMEDIATELY WITH WATER TO POLYMERIZE AND REDUCE
ITS BONDING.SOAKING IN WARM WATER MAY HASTEN LOOSENING OF
BONDING.EYES:IRRIGATE IMMEDIATELY KEEPING EYELIDS APART SO THEY DO
NOT BOND.INHALAT ION:REMOVE TO FRESH AIR.

Flash Point:180F/82C COC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:DRY CHEMICAL,CO*2,WATER SPRAY(IF POLYMERIZATION NOT
HAZARD)
Fire Fighting Procedures:APPROVED RESPIRATORS SHOULD BE WORN.
Unusual Fire/Explosion Hazard:ADHESIVE IN ABSORBENTS MAY POLYMERIZE AND
CAUSE AUTOIGNITION.CONTAM.W CATALYST COULD CAUSE EXPLOS.

Spill Release Procedures:ELIMINATE IGNITION SOURCES.USE CLOTHS TO
ABSORB ADHESIVE.INCINERATE IMMEDIATELY OR STORE IN A CLOSED METAL
CONTAINER.CLOTHS MAY UNDERGO AUTOIGNITION.PROTECT EYES,SKIN AND
CLOTHING FROM CONTACT WITH AD HESIVE.

Handling and Storage Precautions:AVOID CONTACT WITH SKIN,EYES AND
CLOTHING.AVOID BREATHING VAPOR.USE W ADEQUATE VENTILATION TO
MAINTAIN EXPOSURE BELOW TLV.
Other Precautions:IF SKIN-BONDING OCCURS,ATTEMPTS TO FORCE SEPARATING
MAY RESULT IN LOCAL MECHANICAL DAMAGE.REPEATED SOAKING OF BONDED
AREA IN WARM WATER MAY HASTEN LOOSENING OF THE BOND.

Respiratory Protection:APPROVED RESPIRATORS SHOULD BE WORN IF NEEDED.
Ventilation:MECHANICAL(GENERAL) OR LOCAL EXHAUST RECOMMENDED
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE SHOULD BE NEEDED.
Supplemental Safety and Health
PRODUCT MEETS REQUIREMENTS FOR TYPE 1 & CLASS 2 UNDER MIL SPEC
A-46050.VAPORS CAUSE MILD TEARING.WATER INITIATES RAPID
POLYMERIZATION.ACIDIC/BASIC MATL,PEROXIDES CAN RESULT IN
POLYMERIZATION.

HCC:V4
Boiling Pt:B.P. Text:475F/246C
Vapor Pres:<2
Vapor Density:3.8
Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR-SLIGHT HAZE;COLORLESS,PUNGENT ODOR.
Percent Volatiles by Volume:UNK

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION
Hazardous Decomposition Products:COMBUSTION CO*2,CO,OXIDES OF NITROGEN
Conditions to Avoid Polymerization:SEE SUPP DATA

Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL EFFLUENT LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.